One of the best ways to set up a dish is by anchoring a metal pole in the ground with concrete then mounting the dish on top of it.
Reaiming my satellite dish on my roof without a meter.
Mount dish on pole tune dish zip tie where needed.
Determining azimuth and elevation.
You ll see one or two small phillips head screws.
Find out how to.
Or you can do it the hard way as you ve said.
Satellite dish installers almost automatically go for the roof to guarantee the satellite isn t obstructed.
The elevation angle which is up and down and the skew adjustment this is angle that the lnb itself is fixed into the lnb holder.
A satellite dish can be aligned without using a meter by finding the peak angles from the receiver menu and adjusting the dish as necessary.
If you ve purchased a directv multi satellite system we highly recommend professional installation.
Azimuth east west adjustment.
To aim your dish you ll need to know your azimuth and elevation coordinates.
To get a satellite dish aligned correctly you must maximise the signal on three plains.
How to fix satellite dish without a meter step 1 choose a position to install your dish antenna and do the physical antenna installation.
Fill in your trench and compresd dirt evenly to look natural.
Mount the under eave mount using 4 6 lag bolts depending on the mount add the dish to the mount tune the dish.
Elevation concerns the up and down positioning of your dish.
Best locations include the roof or one end of the wall where nothing will obstruct it.
In order to remove the cables without causing damage you ll need a small to medium sized phillips head screwdriver and a 7 16 open ended wrench.
Loosen them then pull off the lnb.
The pole gives the dish more height without it needing to be on the roof.